VIN 1Z37J3S415769

Car Year:	1973
Car's approximate birthday:	February 23, 1973
Owner:	eBay Motors Seller
City:	New Madison
State:	Ohio
Country:	United States
Purchase date:	Undefined
Status:	Current Owner
Nickname:	1Z37J3S415769
State:	Project Car
Exterior:	910 Classic White
Interior:	415 Medium Saddle (Vinyl)
Softtop:	Other Color
Wheels:	Silver	(100.00%)
Delivery Dealer Zone:	Unknown
Delivery Dealer Code:	Unknown
Options:	RPO	Option	Percentage Sold [%]	Sales Price [$]
	1YZ37	Base Corvette Sport Coupe (190hp)	83.77%	5,561.50
	C60	Air Conditioning	70.83%	452.00
	J50	Power Brakes	79.33%	46.00
	M40	Turbo Hydra-Matic Automatic Transmission	58.85%	0.00
	Total		0.000052116947309% (1 Cars)	6,059.50
Factory job nr.:	Unknown
Export Car:	Non Export Car
Other details:	Mileage: 66,586 miles
Car history:
02/07/2014 Where to begin....I bought this off a kid in 1998 who had wrecked the front end and had torn most of it off when I bought it. Brought it home and stripped it to the frame. Could see the frame was tweaked so took it to a local frame and alignment shop (who has been racing corvettes for many years) and they got the frame back in spec. The frame then went to Cincinnati and was dipped, etched, and painted. Home for reassembly and from the ground up to what you see has either been rebuilt or replaced. I have a hair over $5,400 in receipts which I have copied into a pdf file which I can email to you. The 350 that is sitting in it came out of a '70 pickup. It is a 4-bolt main, with solid lifters and was built to be 400+ HP. It is coupled to a newly rebuilt 700R4 transmission. If you look close at the right front a-frame you can see an electric fuel pump sitting there. Due to sitting I believe the diaphram in the fuel pump has given up. Hooked up the electric pump the other day, hot wired the ignition and it fired right of and ran well. Sounds good with the open headers as well. The suspension has been completely replaced, the fuel tank sealed coated outside. After I had the frame painted I took it to my local Ziebart rust proofing guys and had them coat it inside and out. I wasn't making a show car I wanted something to drive. I have acquired the front end off of a '74 which is sort of a jigsaw puzzle project but it was all there and had a lot of stuff I was missing like the grilles. The spare blue doors and hood are also off the '74. The '74 hood is cowl induction and is all there. Don't think the air cover lid is in the pics but I have it. I have repaired some cracks that were in the floor and some other places. The body is no creampuff but from the body down is brand new. Great story from the '74....as you can see from the body parts it was very rough...it came out of Michigan as was so rusted when I loaded it onto the trailer the left side frame broke completely in half and the right side was hanging on by a thread. Almost didn't have to tie it down...it couldn't go anywhere. The pics underneath are not the greatest...tough to do from a jack. I wanted to add to this:...... while the car at this point will start and run it won't move. When forward progress stopped I was in the middle of hooking up the linkage to the 700R4....I had bought a kit from Eklers, Zip or someone and was going to have the driveshaft made to mate the 700R4 to the rear end. That never got completed. Just wanted that clear.
For Sale:	No
Number of visits on this page by other users: 130