|1971 Corvette project car, original Bridgehamptom blue with black leather interior
car. The motor is a 1977 350 Corvette engine with 1977 Corvette 4 speed transmission.
(VO111CKZ) the carb is original to motor. The car has power brakes, power
windows power doors, and air conditioning. The cage from what I can tell is rock
solid with no rust visable under windshield glass. I bought this car from my neighbor
with intensions of restoring it and lost interest. I purchased several parts including
a used frame which is a 1972 automatic frame which needs a little repair work
needed as in pic, other then that frame is really good. If you don't want frame I
can change the price to adjust the difference. The steering coloum is telescoping
and tilt, all glass is there but windshield is cracked. Looks like most of the interior
is there with it being 1977 and 1971 year trim. I believe all instraments and dash
to be 1971 but I don't know. The car ran 20 years ago, I have not tried to start it
since its been sitting in a garage for that long. The front clip is rough and a 69
year. Everything on the shelf goes with the car. I have radiator bracket and radiator,
air conditioning radiator, 2 sets of headlights to make one good pair, rear bumpers,
original taillights, boxs of parts and some NOS bumper brackets. There are 2 hoods,
spare tire holder, New Walker exshaust pipes from motor to mufflers only 4 pieces
total, a set of almost new F40 springs, assembly book (repo). There is also a wiring
harness, wiper motor, wiper door hinge needs repair, misc heating ducts, auto
floor shifter, removable rear window. Under door side trim, door sills, exshaust
bezels and licence plate bezel also but these are pitted. There is also several 74
front brackets and parts that go too. As far as I can tell the rear end is original to
the car. The car was owned by a body shop guy and everything in grey primer
looks close to being ready for paint. The doors are all fitted and open and close nice.
I didn't know anything about this car when I bought it and still really dont since
I've only had it since October 2011. What I do know is the frame on the car is
junk, the doors are 1977, the wheels are 1977 with pretty good tires on them also
with 3 spinners, missing one. The car rolls and steers but I have no keys. If interested
please ask any questions and any pics you want to see. I will help with anything I
can. I do not have a way to haul this, but can box up and ship all parts if needed.
What I know is missing, front bumper and hardware, grills, parking lights, hood
hinges, wheel wells, probally alot of stuff needed under the hood I don't know
about also. Keys both ignition and doors, gas cap cover, side grills, and I'm sure
there is more but I just don't know. The starting price is what I have in this project.
I will work with buyer as best I can with storing the car until pick-up but will need
a check for at least half to do this.
Again please ask any questions or any pics you would like to see.
The frame on the car had been replaced sometime in the past with a automatic
frame. The frame is bent in the right front and both frame corners in front of the
rear wheels have been repaired. Im sure the frame could be fixed and used again.
Price: US $3,250.00