I have a completely disassembled, partially restored 1973 Corvette with a 350, 420 horsepower, 415 ft lbs engine. This engine was built from the Edelbrock Performer 420 hp Bowtie package. The only deviation was the use of a hydraulic roller cam. All the parts in the engine are new and it is assembled but has never been cranked. It has been oiled and I occasionaly use a drill to bring the oil pressure up. It was assembled by RPM in Mt. Juliet, Tennessee. I have new Carerra adjustable shocks, front springs, Edelbrock carburetor, Edelbrock air breather, MSD Ignition including distributor, competition clutch and pressure plate, aluminum radiator, electric cooling fans, and probably some other things that I don't remember. The engine and associated parts were ordered from Summitt Racing and I have the Summitt balance sheet. The steering column, instrument cluster, heater boxes, alternator, power steering unit, wiper motor, bell housing, shifter, and transmission have been restored. The body is on a dolly built to the specs of what the factory was using in 1973 and has been partially stripped but there is still a lot of work left on that. The frame is in good shape and has no rust problems. I have all the parts and some new parts for the interior. Also included is a removable back glass frame. The total value of the parts if bought new and the car itself is around $20,000.
Buyer is responsible for pickup or all shipping arrangements and associated shipping costs.
eBay Item number: 320996656140
|