|
      |
   |
 |
VIN 194678S410818
|
|
|
|
|
|
| Car Year: | 1968 | ||||
| Car's approximate birthday: | February 6, 1968 | ||||
| |||||
| Owner: | Ebay: flynavy30 | ||||
| City: | Pensacola | ||||
| State: | Florida | ||||
| Country: | United States | ||||
| Purchase date: | 01/01/2008 | ||||
| Status: | Current Owner | ||||
| State: | Project Car | ||||
| Exterior: | 992 Corvette Bronze | (11.81%) | |||
| Interior: | 425 Dark Orange (Vinyl) | ||||
| Softtop: | Unknown | ||||
| Wheels: | Unknown | ||||
| Delivery Dealer Zone: | Unknown | ||||
| Delivery Dealer Code: | Unknown | ||||
| Options: | RPO | Option | Percentage Sold [%] |
Sales Price [$] |
|
| 19467 | Base Corvette Convertible (BB 435hp) | 65.22% | 4,320.00 | ||
| L71 | 427ci, 435hp Engine | 10.14% | 437.10 | ||
| M20 | 4-Speed Manual Transmission | 37.67% | 184.35 | ||
| Total | 0.000000836665994% (1 Cars) |
4,941.45 | |||
| Factory job nr.: | G07 | ||||
| Export Car: | Non Export Car | ||||
| Car history: | |||||
| 2) 1968 Black on Black Conv. Trim Tag Numbers: G07 TRIM 425 PAINT 992. Corvette Bronze with Dark Orange vinyl interior originally...6500 RPM tach and the hood emblems would indicate that it was originally a big block car, but I have no proof of such. 136,000 miles (best estimate). Rebuilt 350 (321.6 hp at the wheels). Hooker side pipes (LOUD). T5 5spd manual transmission. full VBP suspension. American Racing Torque Thrust II wheels. Kuhmo MX tires. New Viynl Top. New brake pads all around. New master cylinder. New 13" Grant wood steering wheel. New door panels. New carpet. New seat frames/foam/covers. New MP3/CD player. New kick panel/rear speakers. all instruments/lights work with exception of water temp. I've driven the car about 6000 miles in the past year including a trip from Deleware to Texas and Texas to Florida. Car is extremely reliable and has had ZERO mechanical problems in the 18 months I've owned it. The few problems: Very small leak from driveshaft input to the rear diff. I top it off every time I change the oil and its still 3/4s full, Small leak from oil drain plug in oil pan. A few drops are under the car every morning...typical 41 year old car stuff. The fiberglass on the passenger side front corner where the fender rolls into the engine bay is splintered and needs to be repaired...i looked into having it repaired and it will actually be cheaper to purchase the entire front clip from Mid America for $1,290 part #600-948 and having it painted once on the car. The rest of the paint is fairly good. It's an extremely good looking 5 foot car, even with the 5 inch damage to the fiberglass on the fender/hood seam. 136,000 miles. Colors codes from the trim plate. Built date is G07. September 23, 2009. 1) 1968 corvette restomod convertible 350 five speed tremec transmission (numbers dont match).Car is driver quality car. Paint looks good from 10 feet away but car should be painted to make it a show quality. Small area near hood where fiberglass seperated (shown in pics). In the following description when I say new i mean it was installed 8 months ago and driven for 3000+ miles. New parts now look dirty with some surface rust. Car would be excellent for someone to disassemble, detail with paint and put back together for a killer show car. ENGINE, 350 CHEVY WITH ALUMUNUM RADIATOR EDELBROCK PERFORMER HEADS, ROLLER ROCKERS AND PERFORMER RPM MANIFOLD (AGE UNKNOWN). ALL NEW GASKETS (VALVE COVERS, OIL PAN AND INTAKE) NEW HOLLEY 780 VACCUM SECONDARY CARB, NEW PETRONIX IGNITION, NEW CAP, NEW ROTOR, NEW WIRES, NEW PLUGS, NEW DRESS UP KIT, NEW ALTERNATOR. NEW CERAMIC COATED SIDEPIPES TRANSMISSION: NEW TREMEC 5 SPEED, NEW CLUTCH PRESSURE PLATE AND THROW OUT BEARING, RESURFACED FLYWHEEL, NEW U JOINTS IN DRIVESHAFT BRAKES, NEW CROSS DRILLED ROTORS, NEW CALIPERS, NEW PADS, NEW RUBBER LINES, NEW MASTER CYLINDER. STEERING, NEW STEERING BOX, NEW DRAG LINK, NEW INNER TIE RODS, NEW OUTER TIE RODS, FRONT SUSPENSION, NEW FIBERGLASS MONOLEAF, NEW BEARINGS, NEW Offset upper control arms, NEW Front Bilstein Shocks, NEW1 1/8" front Anti Swaybar kit, NEW All ballJoints, NEW bushings, NEW tie rod ends, NEW sleeves, NEW Idler arm. REAR SUSPENSION: NEW INNER AXLES, NEW OUTER AXLES, NEW POLYBUSHINGS NEW WHEEL BEARINGS, NEW VBP SMART STRUTS, NEW HD DIFF COVER, NEW FIBERGLASS MONOLEAF, ALL NEW U JOINTS IN HALF SHAFTS, NEW SEALS IN REAR, NEW HALF SHAFT LOOPS, NEW SOLID DIFFERENTIAL MOUNTS, WHEELS EXTERIOR: NEW TOP, INTERIOR, HAVE NEW SEAT COVERS AND FOAM NOT INSTALLED YET, REPEAT WHEN I SAY NEW I MEAN 8 MONTHS OLD AND 3000+ MILES. December 28, 2007. |
|||||
| For Sale: | No | ||||
|
Number of visits on this page by other users: 1016 |
|||||
|
|||||
