VIN 194371S118765

Car Year:	1971
Car's approximate birthday:	June 5, 1971
Owner:	eBay Motors tandagarage
City:	Colorado Springs
State:	Colorado
Country:	United States
Purchase date:	Undefined
Status:	Current Owner
Nickname:	194371S118765
State:	Project Car
Exterior:	973 Mille Miglia Red	(10.00%)
Interior:	407 Red (Vinyl)
Softtop:	Other Color
Wheels:	Silver	(100.00%)
Delivery Dealer Zone:	Unknown
Delivery Dealer Code:	Unknown
Options:	RPO	Option	Percentage Sold [%]	Sales Price [$]
	19437	Base Corvette Sport Coupe (270hp)	67.34%	5,496.00
	C60	Air Conditioning	52.66%	459.00
	J50	Power Brakes	62.19%	47.00
	N40	Power Steering	82.12%	115.90
	Total		0.000049741555487% (1 Cars)	6,117.90
Factory job nr.:	Unknown
Export Car:	Non Export Car
Other details:	Mileage:
Car history:
Posted 07/04/2019 This Corvette Stingray restomod that has a rust-free frame, 4 wheel independent suspension, factory 4 wheel power disc brakes, and a LT-1 350 with a Tremec T56 6 speed? This is a great project for someone who has the time to finish it. We simply don't. Too busy with work and so after 4 years of ownership and fun, we need to pass this one along to someone with the time! This steel bumper Corvette was a 4 speed, A/C equipped car from the factory and has an LT1 hood. Since it did not have a motor or transmission when we bought it (no numbers to match here) we decided to build a restomod using a LT-1 350 and a T56 transmission out of our 1994 Camaro SS. The original frame under the Vette was rusted so we replaced it with a rust free 77 rolling frame that had most everything except an engine and transmission. Upper parts of the frame were coated with POR15 before the body was attached, the bottom to be finished later after suspension upgrades. In terms of the Vette body, the corners of the window frame are rusted. Spot welds need to be cut out, rusted parts removed, and new corners welded in (new corners to weld in are included with the car). We cut out and welded in new steel in the areas where the mounting holes on the bottom of the birdcage were rusted. There are also 2 one inch holes on the bottom of the uprights that need to be cut out and replaced. The rest of the birdcage looks intact. There is some minor body work to be done before paint, and there was no signs of damage to the shell or frame from a previous accident/collision. Just an old faded red Corvette that needed some new color (first coat of polyester primer was being applied as we worked the car). This was a complete car minus engine and transmission before we started the build. All parts are with the car. Has the original red bucket seats, red center console, dash, but many of the red vinyl trim pieces are old and faded/cracked, and it will need new door panels. We were going to install a black interior. Needs a new windshield but the door glass is original Astro glass. The LT-1 350 is bolted in but the ignition needs to be wired. The complete wiring harness and computer from the Camaro are included. Crossmember to mount the T56 6 speed manual transmission needs to be modified or replaced it is removable on a 1977 frame. The original 71 crossmember was welded in. In addition to the parts removed from the car, extras and new parts that go with the car include: New Black Carpet and Padding, new exterior door handles, and a new EFI Fuel Tank from Ecklers New replacement window frame corners New Heavy Duty Differential Cover (housing on car has that typical broken ear) Original 4 speed differential and half shafts from rusted 71 frame Extra rear hubs/discs from the rusted 71 frame Title is clear and in my name. VIN tag on the windshield post is intact. No issues there.
For Sale:	No
Number of visits on this page by other users: 107